These curved bladed ProTek RC "TruTorque" Lexan Scissors feature a specific blade angle designed specifically for cutting Lexan (Polycarbonate) material. The curved blades are made from High Quality 420 Stainless Steel and are effective at precision cutting.

For strait line cuts use the ProTek R/C Straight Lexan Scissors (PTK-8278). 

These straight bladed ProTek RC "TruTorque" Lexan Scissors feature a specific blade angle designed specifically for cutting Lexan (Polycarbonate) material. The straight blades are made from Stainless Steel and are effective at precision straight line cutting, as well as light curved work.

For heavy curved cuts use the ProTek R/C Curved Lexan Scissors (PTK-8278). 

The ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan is a great option to keep your ESC and motor temps in check. The fan features a machined aluminum case that helps to dissipate heat, allowing cooler operation of the fan motor at high voltage specs. Plus the aluminum frame work adds strength to the assembly, helping protect the fan blades in the event of a crash. 

The fan is a true 2S HV component, that has been built to last with dual ball bearings, and pre-wired 30mm long 2 pin JST connector. Plus, we include a 200mm long adapter plug that allows you to connect the fan directly to the receiver or another source of power. The fan can be mounted directly to the chassis with double side tape, or by using an optional fan mount (not included).

NOTE: This fan should be installed at least 5mm away from the motor to allow sufficient air flow and prevent magnet interference. 

Features:

• 30mm aluminum cooling fan
• Ideal for ESC and motor applications
• Aluminum casing helps protect the fan blades
• Compatible with 2S HV LiPo systems (8.75V max)
• Anodized black with silver chamferred edges
• Perfect for 1/12, 1/10 and 1/8 scale platforms   
• 2 pin JST connector and included extension for easy installation

Mini Micro Zip Ties Ultra thin Zipties 50pk [Scale Reflex] 700060

Pack of 50 custom made micro zip ties. These are super thin profile for a neat finish! Shave some weight and ke

Reve D UL12 Drift Wheels are a lightweight and high traction wheel for your RC Drift car! Each wheel weighs in at 11g, while providing the proper strength and stiffness. The design of the wheel is very unique, and provides high traction thanks to the hex hub locations, and overall wheel dimensions. The large diameter and thin rim for the inner portion of the wheel prevents contact with the ball ends and suspension arms, while adding higher traction under bumpy conditions. 

There are four different colors to choose from, and all are 6mm in offset. Sold in pairs of two.

Reve D RC Drift Gyro - Precision Control

Reve D RevoX Drift Gyro. This gyro delivers precise and reliable drift control, enhancing your driving experience with its gyro curve feature. Developed through professional driver testing, it offers six adjustable settings to tailor control based on experience level, track conditions, and layout for optimal performance.

Encased in stylish aluminum, the compact RevoX features easy onboard programming via a button for quick setup, ensuring minimal downtime before hitting the track. Additionally, its remote gain function enables swift adjustment of gain and holding power directly from your transmitter, enhancing convenience and control during your drift sessions.

Features:

• Gyro Curve Functions: 6 Stages
• Endpoint Adjustments
• Reverse Switching
• Gain Adjustment: 0-100

Specifications:

• Length: 0.84in (21.5mm)
• Width: 0.92in (23.5mm)
• Height: 0.37in (9.5mm)

Includes:

• (1) RevoX Drift Gyro

Programmer Overview:

The Reve D USB programmer for the RS-ST servos allows you to connect your windows based PC to your RS-ST servos. When connected you can easily make adjustments to five different items, and two servo parameters. This is a must have for fine tuning your servo performance.  

Features:

• Set Up Items:
• Speed
• Torque
• Boost
• Dead Band
• Curve
• Direction
• Servo Trim

Includes:

• (1) RS-ST USB Programmer

LF3P Tires Required

All Drivers will receive a brand new set (4) of LF3P

Round 3 of SDC @ MAXSPEEDSHOP

This is not a product, this is  a registration for a RC drift competition, SDC.

There is no refund whatsoever. All purchases are final.

SHARK - FIXED CHASSIS KIT (IFS COMPATIBLE) DIRECT STEERING (fits RMX 2.5 Trans) [RHINO RACING] RR-806

This will let you ADAPT THE SHARK(DDSS) ONTO YOUR RMX 2.5 

YOU CAN ALSO USE A SHARK TRANSMISSION WHEN YOU'RE READY

FINALLY! NO MORE WAITING OR HUNTING FOR OUTDATED MST PARTS FROM YEARS AGO.
GET THE CURRENT HOTNESS WITH DDSS (Direct Steering) and you can upgrade to all SHARK upgrades in front. You can even run IFS if you'd like. When you are ready, you can also get the SHARK transmission.

This is a conversion kit (not a complete car), DDSS is sold separately   

ITEMS NEEDED AND NOT INCLUDED:
Arms, Knuckles, Turnbuckles, Ball Cups, Ball Studs, etc.,
THIS IS A CONVERSION KIT.

Includes:
1 x Lower Chassis for RMX 2.5 (using DDSS Front Steering)
2 x Upper Decks
1 x Front Bumper
1 x SHARK Battery Mounting Kit
1 x Hardware Pack
 
You can purchase a C-LSD here: (Just add the 2.5 installation kit and you're almost completely SHARK!)
https://supergdrift.com/product/yd2-active-diff-centrifugal-c-lsd-differential-unit-rhino-racing-yd2-c-lsd/
https://supergdrift.com/product/rmx-2-5-c-lsd-adapter-installation-kit-rhino-racing-rmx-clsd-adapter/
 

SHARK Transmission Gear Box (With Upper Deck And Shock Tower) - BLUE SILVER RED PURPLE BLACK - YD-2 RD SD RMX RDX [RHINO RACING] RR-820

Available in SILVER, BLUE, RED, PURPLE, or BLACK

Direct fits ALL YD2 Variations.
Also fits MC-1 and RDX,
*YD2 and MC-1 MUST be SLIDE RACK version.

For installation on BELL CRANK cars, you will need to figure out an upper deck solution.

Features many motor positions and formats. 3 Gear, 4 Gear, Belt Drive, Rear Motor, Top Motor, Reverse Rotation and more!

Includes

1 x Rear Shock Tower
1 x SHARK Upper Adjustable Deck
1 x SHARK Transmission Gear Box Set (left and right)
1 x Top Shaft Bearing Holder Set
1 x SHARK Transmission Rear Cover
1 x Top Shaft
1 x Spur Holder
1 x Motor Plate
1 x Hardware Pack
 
https://youtu.be/CAt_obYV9aQ
SHARK ASSEMBLY:

*Please note, as of Middle of 2023, all SHARK transmissions received revised top shaft/bearing holder, and does not require flanged bearings anymore.
SHARK Transmission Gear Box (With Upper Deck And Shock Tower)
*It is compatible with MC1 (tested), RDX, RMX 2.0/2.5, YD-2, SD1.0, SD2.0, RD1.0, RD2.0
**You need to make sure your lower deck is correct and you have the upper deck resolved. It is designed to run with DDSS front end.
This is a transmission conversion kit (not a complete car), You will need a donor car to complete it.

OFFICIAL CHECK LIST OF WHAT YOU NEED TO COMPLETE A SHARK TRANSMISSION:
Idler Gears (alum or plastic your choice)
Pinion + Spur
1-2 packs of Shims (depending on setup)
5x10x4 Bearings x 4 (goes on idler gears)
15x10mm bearings x 2 (goes on diff)
Differential (C-LSD recommended)
Diff protectors if you need it for your diff
 

Roll Cage Overview:

SRC 1/10 Drift Roll Cage. This is a meticulously crafted, ultra-realistic body accessory tailored to seamlessly complement the majority of 1/10 drift car bodies. With extreme attention to detail, SRC even included beautiful weld lines. The cage effortlessly attaches with its flat tabs and servo tape, ensuring a snug and stylish fit.

Features:

• Stunning welds that complement the cage
• Adds super scale aesthetics to your masterpiece
• Fits most 1/10 drift bodies

Includes:

• (1) Rear X-brace
• (2) A-Pillars
• (2) B-Pillars
• (12) Mounting tabs

• Universal mount with bendable wire for quick and easy customization.
• CR2032 3V button batteries.
• 1-inch 304 Stainless Steel "Straight-Pipe or Angle-Cut" Style Muffler Tips
  • Custom 3-D Printed mount allows for adjustability of muffler length AND angle from body.
  • 3-1/2" to 4" wire leads from battery casing to LED module.

Toyota Cresta JZX100 BN Sports BLS 1-10 Body Set [Pandora] PAB-3225

Includes roof wing, trunk wing, aero grill and vented wide fenders.

1/10 size non-painting polycarbonate body
Decare & Masking is attached
Separate Front Bumper
Light Inner Parts （Front / Rear）
Made in Japan
Approved by Toyota Motor Corporation

*This is a clear body and is not painted, YOU NEED TO PAINT IT YOURSELF

Toyota GR86 FRS BRZ BLS BN Sport 1-10 Body Set [Pandora] PAB-3218

Manufacturer: Pandora-RC Japan
Part Number: PAB-3218
Size: FRONT 200mm REAR 204mm
Includes: Mask sheet made from premium masking tape. You can download the outlines from Pandora's website to print out Window Masks & Light Masks
Printed Exterior Trim/Accessories Decals, Light Buckets(Lexan) are included.

You will need to paint this body yourself.
*Body DOES NOT COME PAINTED

**WING AND SIDE MIRRORS ARE NOT INCLUDED

=========================================
1/10 use
The product is non-painting.
Body made by polycarbonate
Decare & masking is attached
The image of the publication is a painting example.
The sale product becomes the clear body.
The accessories such as a mirror or the windshield wiper are not in the product.
Made in Japan
Approval by Toyota Motor Corporation

The "Yaba KING MESH" 326POWER made a shocking debut with its incredibly cool deep rims. These meticulously crafted wheels have been perfectly reproduced using OVERDOSE's technology! The extremely deep rim is achieved through OVERDOSE's unique design, which does not have ribs on the back of the wheel, and the bold yet delicate mesh pattern has been faithfully reproduced!

The offsets are +7mm and +10mm. The wheel width is 26mm.

These are in HIGH CHROME

Introducing "R-Spec Work Emoton Kiwami". the competition specific wheel with the ultimate traction capability. Since having the best traction capability is crucial to win drift competitions. OD successfully developed this ultimate wheel for anyone to gain high traction capability without changing chassis settings.

Although the shape was kept same as the original Kiwami, the material has been carefully selected and applied to create the best traction capability. This is a high spec wheel with razor etching R-SPEC logo on the rim. 

*Please be aware that this wheel can be more easily distorted than the regular wheel due to its competition specific structure.

The legendary WORK MEISTER S1R returns to your RC drift build with authentic three-dimensional presence. These 26mm wide wheels feature a +7mm offset for that aggressive stance. The ribless spoke design maintains strength while preserving the classic silhouette.

Choose matte chrome or high chrome finish.

OVERDOSE delivers realism that transforms any chassis.

Reissued ultimate realistic wheel from OVERDOSE

Faithful reproduction of WORK MEISTER S1R design

Ribless spoke design (characteristic of OVERDOSE wheels)

Sufficient strength without compromising wheel image

Offset: +7mm

Wheel width: 26mm